CCIE Mastering Python
Current Status
Not Enrolled
Price
Expert Level
Get Started
Take this Course

Part of the Todd Lammle CCIE Mastering series

74 intense hands-on labs included! Learn Network Programmability and Network Automation using GNS3 and Python.

Want to program networks using Python, but not sure where to start? Well, this course will show you how you can start programming Cisco networks within 20 minutes. This course was created for network engineers. There are too many other Python courses out there that try to make network engineers into software developers. Instead of teaching network automation, they teach you Python theory. This course is different.

This course is practical. This course shows you practical examples of using Python to programmatically configure Cisco network devices rather then just talking about it.The days of configuring Cisco networks only with the command line interface (CLI) are drawing to a close. You need to add network programmability using Python and APIs to your skill set. Learn how to automate networks using: Telnet, SSH, Paramiko, Netmiko, NAPALM, pyntc

Course Content

Expand All
14- Mastering Python Get version information from a switch 22 Topics
Expand
Lesson Content
0% Complete 0/22 Steps
CCIE 14.1 – Mastering Python – Get show version from switch (P65_14)
CCIE 14.2 – Mastering Python – Telnet and string offset (P65_16)
CCIE 14.3 – Mastering Python – Show version using len (P65_17)
CCIE 14.4 – Mastering Python – Split 1 (P65_18_21)
CCIE 14.5 – Mastering Python – Split 2 (P73_18)
CCIE 14.6 – Mastering Python – List and join (P73_17)
CCIE 14.7 – Mastering Python – List and len – use Interface example (P73_25)
CCIE 14.8 – Mastering Python – Index introduction(P66_1)
CCIE 14.9 – Mastering Python – Real switch get version using index and slice (P66_2_3)
CCIE 14.10 – Mastering Python – Python3 telnet to switch (P66_4)
CCIE 14.11 – Mastering Python – Count (P66_6)
CCIE 14.12 – Mastering Python – Use find to get information from a real switch (P66_10)
CCIE 14.13 – Mastering Python – Python3 Telnet versus Python2 – Find version of software (P66_11)
CCIE 14.14 – Mastering Python – find not found (P66_12)
CCIE 14.15 – Mastering Python – String methods – upper (P66_13)
CCIE 14.16 – Mastering Python – String methods – startswith and endswith (P66_14)
CCIE 14.17 – Mastering Python – String methods – strip (P66_15)
CCIE 14.18 – Mastering Python – String methods – split demo (P66_16)
CCIE 14.19 – Mastering Python – String methods – Join (P66_17_18)
CCIE 14.20 – Mastering Python – String methods – is it in string (P66_19)
CCIE 14.21 – Mastering Python – String concatenation (P66_20)
CCIE 14.22 – Mastering Python – Capitalize, upper, lower, swap (P66_23)